2110i

The BE-2110i TIMS Test Set ~ Manufacturer Discontinued

SEND & RECEIVE TONE
WIDEBAND
MEASURE NOISE
QUALIFY BRI ISDN
8 IMPEDANCES
CARRYING CASE
BERRY RELIABILITY
ECONOMICAL
& the case is Berry Blue

The BE-2110i from Berry Test Sets is a compact, easy to use, battery powered TIMS / Impulse Measuring set designed to comply with PUB 41009/IEEE 743 specifications for VF test instruments. Test set includes a soft- sided carrying case, battery charger, instruction manual and two cords.

FEATURES:

Has 2 wire and 4 wire capability with dual electronic hold circuits
Quickly measures voice band and wide band (to 125 kHz) circuit parameters and noise
with 7 different weighting filters available.
Measures Impulse noise with a 5 minute timer and user selectable thresholds
Measures level from +10 dBm to -40 dBm
Measures frequency from 200 Hz to 125 kHz
Sends frequencies from 200 Hz to 125 kHz at +10 to -40 dBm in 0.1 dB steps
Utilizes two frequency sweep speeds, full autoranging capability
Has seven terminating impedances and bridged and quiet terminating functions
Qualifies ISDN BRI circuits*Test set defaults to 2 wire receive, bridged function to minimize
circuit impact when connecting the set.
Contains circuit monitoring features

GENERAL

Measurements: Level (dBm), Noise (dBrn), Impulse Noise, Frequency (Hz)

Configuration Readout:
     Full Duplex Send & Receive on
     a 2.8" X 1.5"

Graphic Liquid Crystal Display with digital contrast control and EL Backlight.

Monitor: Speaker, send or receive with digital volume control and off.

Dial/Hold: Full 2W/4W capability Dual Electronic Hold

Input/Output

Controls: 29 Key Membrane keypad with separate impedance and function controls for send/receive

Impedances: 135; 150; 430; 600; 900; 1200; 1500 Ohm and Bridged (Balanced)

Line Hold: Dual Electronic

Protection: DC & Transient

Environment

Case: High Impact fiber-plastic, with soft-sided carrying case.

Cords Conversion: 310/Alligator clips

Size 7.5"w X 10 3/4" h X 2" d

Weight Approximately 4.2 lbs.

Power: Rechargeable Sealed Lead Acid Battery with Low Battery
indicator and user selectable timed auto shutoff.

Optional: AC Adapter Input--120VAC; Output--12VDC, 500mA
Operating Temperature: 0° to +50° C (32° to 122° F)
Storage Temperature: -10° to +60° C (14° to 140° F)
Humidity: 10 to 90%, non-condensing

RECEIVER

Frequency Measurement Range: 200Hz to 125kHz
Level: +l0dBm to -40dBm
Accuracy:
Frequency: +/- 2 Hz
Resolution: +/- 1Hz

Impulse Timer: User selectable thresholds 50 to 85 dBrn, 5 minute time interval,

Default Time Interval: 5-minutes

Level Measurements

Frequency range: 200Hz to 125kHz

Measurement Range: +10dBm to -40dBm with Full Auto Ranging

Accuracy:
     +/-0.1 dB at 1000HZ for levels
               between 0 and - 19dBm
     +/-0.2dB all other frequencies

Resolution: 0.1dB

Relative Lvl M'suremnt: +10 to - 30
Adjust Range

S/N Measurement: 20 to 50dB Range

Noise Measurements

Weighting: D Filter, 1KHz Notch, C
Message, C Message Notch ~ 3.4KHz
Flat, 15KHz Flat, and E Filter

Measurement Range:

Message Circuit Noise: 20 to 70dBm

Noise with Tone: 30 to 70dBm

Accuracy: +/- 1dB

Detector Type: True RMS

Resolution: 0.1dB

TRANSMITTER

Level: -40.0dBm to +10dBm in 0.1 dB steps.

Range: 200Hz to 125kHz

Accuracy:
Frequency: +/-1Hz

Level:       +10.0dB to -10.0dB: +/- 0.05
                    dB/dB
                 -10.0dB to -40.0dB: +/-.5dB.

Flatness: +/-0.25dB

Impedances: 135; 150; 430; 600; 900; 1200; 1500 Ohms

Type Oscillator: DDS

Modes:

Manual: 200Hz to 99.999KHz in 1Hz Steps
100KHz to 125KHz in 10Hz Steps

Fixed Freqs: 404; 1004; 2804; 2713Hz

Sweep: 2 Speeds, Automatic I00Hz
Steps with S.F. Skip

User Selectable sweep rate & step size

Quiet Termination: Line Terminated in Characteristic Impedance